Galvanizing of gratings

Metal gratings are widely used in construction, industry, and landscaping — from ventilation and protective structures to fences and decorative elements. They are exposed daily to moisture, dust, temperature fluctuations, and mechanical loads. Without reliable protection, steel quickly loses its strength, becomes rusty, and eventually needs repair or replacement. That’s why hot-dip galvanizing of gratings is the optimal solution that ensures durability and resistance of products even under the most demanding operating conditions!

Looking for where to manufacture gratings or metal structures?

Contact our subsidiary company “Ukrainian Factory of Steel Products”. It provides a full production cycle — from simple parts to complex metal engineering solutions.

Hot-Dip Galvanizing Technology for Gratings

To ensure maximum protection, before immersion in molten zinc, each grating at our plant goes through a multi-stage preparation process. First, we clean the metal from grease, rust, and oxides, then rinse it, apply flux, and dry it. Only after this is the grating ready for the main stage.

Hot-dip galvanizing takes place in special baths at a temperature above 440°C. At this moment, a reaction occurs between iron and zinc, resulting in the formation of a multilayer diffusion coating. It bonds firmly to the base at the molecular level and provides the following advantages:

  • uniform protection even in the smallest holes and welded joints;
  • resistance to scratches, chips, and mechanical damage;
  • durability — the service life of gratings increases 3–5 times;
  • preservation of aesthetic appearance even without painting.

Useful Information for Our Clients

We understand that you value not only coating quality but also transparent cooperation conditions. That’s why we offer clear work parameters:

  • cost: from 33 UAH/kg (VAT included) for products weighing from 2 kg (the possibility and feasibility of galvanizing smaller products should be confirmed with our manager)
  • minimum order: from 600 UAH (VAT included)
  • maximum product dimensions: 6500x1500x2500 mm (if at least one dimension of your product exceeds the specified parameters — contact us by phone or message to clarify whether galvanizing is possible)
  • lead time: up to 10 working days
  • receiving and delivery: from 9:00 to 16:00 (lunch break 12:00–13:00)
  • payment: after the work is completed

If you haven’t found the answer to your question — check the full “FAQ” section or call our manager for consultation: +38 (050) 430 38 38.

Our Key Advantages

We don’t just provide galvanizing services — we care about quality and client comfort at every stage of cooperation. That’s why working with us is based on values that make us stand out:

  1. Care: we create safe and comfortable working conditions for employees and visitors;
  2. Partnership: we build long-term relationships with clients based on trust and mutual respect;
  3. Creativity: we implement innovative approaches and look for non-standard solutions;
  4. Collaboration: we maintain a culture of continuous improvement and teamwork;
  5. Environmental Responsibility: 99% of our production waste is recycled.

You can learn more about our history, mission, and activities in the “About the Plant” section.

Conclusion

Hot-dip galvanizing of gratings is a reliable way to extend the service life of products several times over, preserving their strength and attractive appearance even under harsh operating conditions. Thanks to modern technology, the metal gains protection that requires no regular maintenance or repainting.

If you want your gratings to remain functional and look like new for decades — contact the First Ukrainian Zinc Plant. We guarantee quality proven by experience and international standards!

Submit a Request

Цей вебсайт використовує файли cookie. Продовжуючи переглядати сайт, ви погоджуєтесь на наше використання файлів cookie.
OK